[Fot] TR3/4 Crankshaft Thrust Washers

[M&M Hado]

Thanks for the replies.  It looks like Moss Europe has +.0075" and Greg
Solow's Engine Room in Santa Cruz is another lead.  Both suggestions from
Bob Kramer.  Also, 3 others, including Ken Gillanders, suggested bonding a
shim to the back side.  I tried that already (with stainless and JB weld)
held in a vice overnight but couldn't get a good bond.  Trying the brass
tonight but the safe way is probably the Moss shims on both sides.
Appreciate your help in trying to salvage an otherwise good crank.

Mike

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net]On
Behalf Of M&M Hado
Sent: Thursday, March 04, 2010 5:37 PM
To: fot at autox.team.net
Subject: [Fot] TR3/4 Crankshaft Thrust Washers


Does anyone have a source for oversize TR3/4 crankshaft thrust washers
beyond +.005?  Moss used to have a .008" but no more apparently.

Thanks,

Mike
\
_______________________________________________
fot at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/mdhado@comcast.net