[Fot] TR4 rear axle bearing

[Joe Curry]

In addition, the old bearing and race will most likely have the manufacturer
and part numbers on them.  That will make matching them up a snap.

But then, you probably want to take the old one off and install the new one
in the same session.

Joe C.

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of RACER BUD
Sent: Tuesday, June 29, 2010 10:56 AM
To: Brad Kahler; Friends of Triumph
Subject: Re: [Fot] TR4 rear axle bearing

i suggest taking the bearing to a NAPA parts store..they will measure it, 
and match it up for you on the spot..at least the store here in Sonoma, Ca. 
does.
Racer Bud
----- Original Message ----- 
From: "Brad Kahler" <brad.kahler at 141.com>
To: "Friends of Triumph" <fot at autox.team.net>
Sent: Tuesday, June 29, 2010 10:41 AM
Subject: [Fot] TR4 rear axle bearing


> Amici,
>
> I need to replace one of the rear wheel bearings on my street TR4.
> Rather than take the time to order from one of the normal suppliers
> I'm wondering if anyone would know what the part number for the
> bearing and race might be from say Timken or National? (or any other
> brand that I can cross reference locally).
>
> Thanks!
>
> Brad
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/budscars@comcast.net
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/spitlist@cox.net