[Fot] Flywheel Bolt Locking Plates

[Jerry Van Vlack]

Lacquer thinner seems to clean anything but it's rough on the skin. That's 
what I was going to use. Gasket cleaner may well be Lacquer thinner as I've 
used thinner to clean gasket surfaces and it works well.
JVV
----- Original Message ----- 
From: "Tim Murphy" <timmurph at fastbytes.com>
To: "'MadMarx'" <tr4racing at googlemail.com>; <fot at autox.team.net>
Sent: Thursday, July 22, 2010 5:39 PM
Subject: Re: [Fot] Flywheel Bolt Locking Plates


> Thanks Chris, I've been using lacquer thinner and a brass gun cleaning 
> brush
> on a drill along with dental picks to clean the Loctite out of the 
> threads.
> I'll try the gasket remover next time.
>
> Tim
>
> -----Original Message-----
> From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
> Behalf Of MadMarx
> Sent: Thursday, July 22, 2010 2:32 PM
> To: fot at autox.team.net
> Subject: Re: [Fot] Flywheel Bolt Locking Plates
>
> Gasket remover will clean the bolts and holes from old Loctite.
>
>
> -----Urspr|ngliche Nachricht-----
> Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
> Auftrag von WEmery7451 at aol.com
> Gesendet: Donnerstag, 22. Juli 2010 18:48
> An: jerryvv at roadrunner.com; fot at autox.team.net
> Betreff: Re: [Fot] Flywheel Bolt Locking Plates