[Fot] Wing or Side Fender Vents

[Tony Drews]

I think the link is really www.revingtontr.com .  To make them 
yourself if quite a challenge.  The grille is a Triumph Herald grill 
that's cut down, as I recall.

- Tony

At 07:28 AM 1/19/2010, Deanes, Robert wrote:
>The side vents can be bought from www.revingtotr.com and the part numbers
>areRTR7019 for the wing ducts and RTR7060 for the grille first numbers price
>is 173.25 and the second is 58.91 that is in there money, to us it is about
>300.00 plus. Contact there is Bill White.
>
>
>Hope that helps,
>Rob Deanes
>TR-4 Racer
>
>
>-----Original Message-----
>From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On Behalf
>Of gsfuqua1 at aol.com
>Sent: Tuesday, January 19, 2010 3:46 AM
>To: fot at autox.team.net; triumphs at autox.team.net; 6pack at autox.team.net;
>tony at tonydrews.com; N197TR4 at cs.com
>Subject: [Fot] Wing or Side Fender Vents
>
>I am looking for a set of the chrome grill vents that many of the Rally TR
>4's used.  As I recall they were slightly squarish in size and had a large
>checker board grill affect.  The idea being to let some of the engine bay
>heat be carried out through the side wings or fenders.  The fit flush with
>the side of the fender or wing and extend inward into the engine bay.
>
>Any help would be greatly appreciated.
>
>Cheers, Gary
>Suggested annual donation $12.96