[Fot] silicone Valve Cover Gaskets

[Tony Drews]

This is probably a good place to start:
http://jmwagnersales.com/

Works with the stock valve cover, not the aluminum one as I 
recall.  The folks who have them seem to love them.  You really need 
to have the engine cool to install the valve cover with this gasket 
in place - the heat expands the gasket and makes things difficult for 
installation.  So, if you're frequently pulling the valve cover 
between sessions at the track it's a bit of a challenge.  Otherwise, 
it's a nice solution.

- Tony Drews

At 10:20 AM 1/16/2010, Mark Pendergrass wrote:
>Guess i'm outta the loop here, how do i/we get more info. on this 
>product, Mark P.
>----- Original Message ----- From: "marty sukey" <trmarty at hotmail.com>
>To: "Scott Janzen" <s.janzen at comcast.net>; "FOT" <fot at autox.team.net>
>Sent: Saturday, January 16, 2010 7:13 AM
>Subject: Re: [Fot] silicone Valve Cover Gaskets
>
>
>>I have one of Justin Wagner's gaskets on my engine and would definitely do it
>>again. Good stuff.
>>
>>Marty
>>
>>>From: s.janzen at comcast.net
>>>To: fot at autox.team.net
>>>Date: Fri, 15 Jan 2010 15:20:51 -0500
>>>Subject: [Fot] silicone Valve Cover Gaskets
>>>
>>>has anyone had good or bad experiences with these?  Thinking about
>>>replacing the leaky cork one on my GT6 - it does have an alloy cover.
>>>
>>>I'm guessing this has been discussed before - is there a way to search
>>>the archives by subject?