[Fot] TR-3/4 main cap bolts / ARP

[Greg "Lunker" Hilyer]

I've have a set of 8 of these [ARP rod bolts] new in the package if  
anyone wants them for my cost... maybe a little less. Don't remember  
what I payed and I'm a couple years late in sending them back, but  
let me know if interested.
Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Jan 13, 2010, at 4:03 PM, Larry Young wrote:

> Tony,
> I don't know the dimensions, but the ARP part no. 200-6021 for the
> replacement bolts for stock rods.  They come in packages of two.  
> Highly
> recommended.
> Larry Young
>
> Tony Drews wrote:
>> Anyone have info on dimensions for TR-4 main cap bolts?  The manual
>> shows 1/2" UNC but not the length.  I'm trying to figure out what ARP
>> bolts you would buy to replace the stock bolts, and also one that's
>> 1/2" longer to allow for "strapping" the center main.  If I had the
>> dimensions (length) I could try to cross reference the engines that
>> ARP lists main cap bolts for.
>>
>> Thanks in advance,
>> Tony Drews
>> _______________________________________________
>>
>> Support Team.Net http://www.team.net/donate.html
>>
>> Suggested annual donation $12.96
>>
>> You are subscribed as cartravel at pobox.com
>>
>> http://www.fot-racing.com
>>
>>
>> Fot at autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> Brought to you by Team.Net consulting - Unix software specialist.
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as lunkercars at earthlink.net
>
> http://www.fot-racing.com
>
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.