[Fot] Cryo treatment

[Greg "Lunker" Hilyer]

Personally I have no gripes with rotor wear even with KFP pads. I did  
have the front stub axles done. Also had my rear axles done with  
bearings and seals installed - no problem. But that was before I went  
Southwick. Next time around I'll do the rods, rocker assembly and  
valve springs.
On a side note, the first crank I had done came back with a crack  
right where you'd expect it [on a 4] - at the #4 journal. It had been  
magna-fluxed before the treatment and after. I am convinced that the  
treatment brought the previously undetected crack to the visible  
surface and saved me a engine right there.

Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Aug 29, 2010, at 9:26 PM, Charly Mitchel wrote:

> I got my done by a firm locally and I thought was reasonable, I  
> think about $125.
> Yeah, I like it and I'm thinking of having some brake rotors done  
> to see how they last.
> Charly Mitchel
> TR6 #44