[Fot] Cometic TR3 head gasket

[vintage.racer at comcast.net]

Chris: 


Here's their website: 


http://www.cometic.com/default.aspx 


Gary 
----- Original Message ----- 
From: "MadMarx" <tr4racing at googlemail.com> 
To: "J.C. Hassall" <jhassall at blacksburg.net>, "Joe Boruch" <jaboruch at netzero.com> 
Cc: fot at autox.team.net 
Sent: Friday, August 6, 2010 5:00:47 AM 
Subject: Re: [Fot] Cometic TR3 head gasket 

What material is the gasket made from? 

Chris 

-----Urspr|ngliche Nachricht----- 
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im 
Auftrag von J.C. Hassall 
Gesendet: Freitag, 6. August 2010 13:34 
An: Joe Boruch 
Cc: fot at autox.team.net 
Betreff: Re: [Fot] Cometic TR3 head gasket 

On 8/5/2010 9:47 PM, Joe Boruch wrote: 
> I was not aware that Cometic had one for the TR4, this is great news! 
Their web site only shows it as 88mm. Anyone know if this has the relief to 
match grinding the top of the cylinder liner for intake valve flow? Joe(B) 
> 
They'll make a gasket for whatever bore you request. I have 89mm 
sleeves, so they made an 89mm gasket, same price as a stock gasket, 
IIRC. The gasket does not have the relief tho. 

jim 

-- 
Jim Hassall 
Blacksburg VA 
'63 TR4 in autox preparation 
99% finished, 90% to go 
_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe: 
http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com 
_______________________________________________ 
fot at autox.team.net 

http://www.fot-racing.com 

Donate: http://www.team.net/donate.html 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 
Unsubscribe: http://autox.team.net/mailman/options/fot/vintage.racer@comcast.net