[Fot] Cometic TR3 head gasket

[J.C. Hassall]

On 8/5/2010 9:47 PM, Joe Boruch wrote:
> I was not aware that Cometic had one for the TR4, this is great news!  Their web site only shows it as 88mm.  Anyone know if this has the relief to match grinding the top of the cylinder liner for intake valve flow?   Joe(B)
>    
They'll make a gasket for whatever bore you request.  I have 89mm 
sleeves, so they made an 89mm gasket, same price as a stock gasket, 
IIRC.  The gasket does not have the relief tho.

jim

-- 
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go