[Fot] sending unit question

[RACER BUD]

Hi Kevin..borrow a temperature gun and shoot it at the area where the 
sending unit goes into the radiator...see if the #s match..
RB
----- Original Message ----- 
From: "KEVIN LYNCH" <klynch_6 at msn.com>
To: "FOT" <fot at autox.team.net>
Sent: Friday, April 30, 2010 10:23 AM
Subject: [Fot] sending unit question


> Recently I had to swap out my water temp gauge. I have heard that the 
> sending
> unit that came with it needs to be in place for accurate readings. I've 
> been
> seeing a higher than usual reading is the reason for my question. The 
> existing
> tapped port is a #6 Brit parallel thread according to my local Parker 
> Store
> rep. instead of 3/8x18 pipe thread.
> thanks in advance,
>
> Kevin
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/budscars@comcast.net