[Fot] spitfire bolt/thread sizes needed

[Jim Gambony]

Aaron,

Radius arm to pivot brackets and links-   3/8"x24 tpi x 2 1/4" bolt
Spring to vertical link   7/16"x20 bolt approx 3" (factory manual didn't
list length)
Inner Tie Rod to outer tie rod thread 1/2x20 thread


HTH


Jim
Dallas

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of fpspitfire at comcast.net
Sent: Tuesday, April 27, 2010 4:11 PM
To: fot at autox.team.net
Subject: [Fot] spitfire bolt/thread sizes needed

Can someout out there tell me what the thread sizes are for the following
components on a spitfire...my car is 900 miles away so I don't have easy
access...



Inner Tie rod thread to ball joint

bolt for the Radius rod attachment to the chassis bracket or to the vertical
link

boltB through the spring at the top of the vertical link



aaron
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jgambony@gcecisp.com



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.805 / Virus Database: 271.1.1/2837 - Release Date: 04/26/10
13:27:00