[Fot] TR4A Stripped Threads in Block

[Tim Murphy]

Be interesting to know how much torque this would hold on a repaired stud.

Tim

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Justin Wagner
Sent: Sunday, April 25, 2010 9:57 PM
To: M&M Hado
Cc: fot at autox.team.net
Subject: Re: [Fot] TR4A Stripped Threads in Block

I have no opinion on this and no experience with this product... but I 
thought I'd throw it in the mix for discussion....  Follow link...  
--Justin 

http://tds.loctite.com/tds5/docs/FORMSTRK-EN.PDF



M&M Hado wrote:

>A friend just stripped one of the long cylinder head stud threads in the
>deep hole when the torque got to 90 ft-lb.  It was hard seeing a grown man
>cry.  My first thought is that the block is toast.  I'm sure he's not the
>first so are there any suggestions for a fix?  It's a street TR4A.
>
>Mike
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe:
http://autox.team.net/mailman/options/fot/jmwagner@greenheart.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com