[Fot] TR4/IRS header

[Fred & Mary Hodgson]

From: stlnyc at msn.com
To: tony at tonydrews.com
Subject: RE: [Fot] TR4/IRS header
Date: Sat, 24 Apr 2010 19:30:02 -0600



Amici-

The difference between the TR-4 and TR-4A is the mounting brackets for the
lower a-arms.  The 4 has the old TR-3 mountings whereas the 4A has the TR-6
type brackets that go inside of the frame rail.  In the case of the Stahl
header for the 4, it wouldn't clear the mounting bracket.  Too much material
would have to be removed from the bracket to clear the header which
could/would prove unsafe.  Altering the header for clearance would screw up
the flow.

Fred Hodgson

> Date: Sat, 24 Apr 2010 17:42:55 -0500
> To: fot at autox.team.net
> From: tony at tonydrews.com
> Subject: Re: [Fot] TR4/IRS header
>
> Just for my background knowledge, what's the difference in the header
> between a 4 and a 4A? I'm gathering that it should be shorter for the 4A?
>
> Thanks, Tony
>
> At 05:05 PM 4/24/2010, Jim Gray wrote:
> >I'm getting pretty close to
> >making my own.
> >Mordy, do you still have the
> >flanges ?
> >
> >Jim G
> <snip>
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/stlnyc@msn.com