[Fot] Spindle Spacer Shims

[WILLIAM TOBIN]

  Joe, I guess I'm not the only guy who stashes out parts where I'll be sure
to find them later on, then forgets  where I stashed them! I'm in the
process of finding some whitworth wrenches for a friend. Now where did I
leave them?
  As for the spacers, maybe Tony Drews could help you out with some of Uncle
Jacks shims.
  Good luck, Bill----- Original Message -----
  From: "Joe Boruch" <jaboruch at netzero.net>
  To: <fot at autox.team.net>
  Sent: Wednesday, September 23, 2009 10:25 AM
  Subject: [Fot] Spindle Spacer Shims


  > Amici, where can I buy a set of shims for the uprated front spindle
spacers to
  > use with Southwick front hubs?  After installing mine recently I put the
  > leftover shims in a safe place and now I can not find them.  I have
looked in
  > all of the safe places that I can think of, but to no avail.  Joe(B)
  > ____________________________________________________________
  > Click for affordable Student Health Insurance plans.
  >
http://thirdpartyoffers.netzero.net/TGL2231/fc/BLSrjnxQxK6xQGoQFkQBG1JjLkqvO
5
  > PnCEAEz8wAygA6jCdQFSFlP9raybu/
  >
  > _______________________________________________
  >
  > Support Team.Net http://www.team.net/donate.html
  >
  > http://www.fot-racing.com
  >
  > You are subscribed as william.tobin3 at verizon.net
  >
  > Fot at autox.team.net
  > http://autox.team.net/mailman/listinfo/fot