[Fot] TR/Gt6 compressin ratios and bearngs

[Gt6steve at aol.com]

The heavy duty King bearings are about the best we can get nowadays.
 
 
In a message dated 10/27/2009 1:21:25 A.M. Pacific Daylight Time,  
BillBartlett at wingnutracing.com writes:

Hi  Fot'rs
I am still working on the GT6 motor and was wondering what  compression 
ratios
people are running in their 6 banger engines, and what  bearings are being
used. I am hearing that there are no lead indium racing  bearings for the 
GT6
and as a result one needs to run stock bearings. Also  that due to an
inefficient combustion chamber that it is better to keep the  compression 
ratio
in the low 12's vs approaching 13 to help the flame  spread and reduce
detonation by reducing height of the piston  intruder.
Thoughts?
Hope everyone had a good season
Bill
>  Fot at autox.team.net
>  http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by  Team.Net consulting - Unix software  specialist.
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought  to you by Team.Net consulting - Unix software  specialist.
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought  to you by Team.Net consulting - Unix software  specialist.