[Fot] TR4 coolant plumbing help and ideas needed

[quicktr4]

 sounds like your getting close to having a race car .the line at the block 
at #4 goes to the wtr pump housing discharge it will need to be drilled and 
a fitting installed. this pumps cooler water into the back of the block.you 
may need more radiator than stock. Jeff
----- Original Message ----- 
From: "Mike Mehl" <mike.mehl at yahoo.com>
To: "Triumph Friends of" <fot at autox.team.net>
Sent: Saturday, October 17, 2009 8:13 AM
Subject: [Fot] TR4 coolant plumbing help and ideas needed


>I got my engine back yesterday.  While at the ABFM in Portland over Labor 
>day
> I took a bunch of photo's and had conversations with a few of you 
> regarding
> additional plumbing to get the back of the engine cooler.  It is pretty 
> clear
> that a line needs to come out where the heater port is and run back to the
> thermostat housing.  I have photos showing a line coming from the drain 
> port
> but I am not sure where to return that too.  Also should I run a 
> thermostat.
> I would really appriciate some ideas or even photos.
>
> On some other notes.
> The fuel cell is mounted up and the doorbars and dash bar are just about
> done.
>
> Thanks for the help.
>
> Mike Mehl
> Tired of
> spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> You are subscribed as quicktr4 at comcast.net
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot