[Fot] trans-blanket
mordy
gasket.works at gte.net
Sat Jun 6 23:44:14 MDT 2009
I had taken a transmission to Diest Safety several years ago and had these
SFI rated ballistic blankets made up. these are about 1/2 inch layered
balistic nylon. They fit perfectly as they are cut to fit our
transmissions.Tr3/4/6. They have a reflective aluminized side where the
header pipe is. Several tabs up front and bolts to the transmission bell,
wraps around and ties together on bottom with double d rings and straps.
They use the same stuff on Dragsters and seems to work for their needs.
Mordy
M.N.Dunst
Gasket Works USA, LLC
www.Headgasket.com
Triple R Munitions, Inc.
626.358.1616 ph
626.628.3777 fx
GMT -8 Pacific
----- Original Message -----
From: "Barr, Scott" <sbarr at McCarty-Law.com>
To: <mpendy at dishmail.net>
Cc: <fot at autox.team.net>
Sent: Saturday, June 06, 2009 7:43 PM
Subject: Re: [Fot] trans-blanket
> We got ours from Racer's Choice someplace in Texas. It's their "universal"
> blanket - ballistic material with three straps and two mounting tabs to
> bolt to the bellhousing. You can wrap the whole bellhousing and it's wide
> enough to cover the front half of the trans as well.
>
> There may be a bit of an issue in retaining too much heat in the trans,
> but who knows.
>
> It wasn't that expensive, either.
>
> Scott B.
>
>
> ________________________________
>
> From: Mark Pendergrass <mpendy at dishmail.net>
> To: Barr, Scott
> Cc: friends of triumph <fot at autox.team.net>
> Sent: Sat Jun 06 10:10:36 2009
> Subject: Fw: trans-blanket
>
>
>
> ----- Original Message -----
> From: Mark Pendergrass <mailto:mpendy at dishmail.net>
> To: sbarr @ McCarty-Law.com <mailto:sbarr%20@%20McCarty-Law.com>
> Sent: Saturday, June 06, 2009 7:58 AM
> Subject: trans-blanket
>
> Scott; You made mention of a trans. blanket ie; ballistic blanket on your
> e-mail about breakin oils, have tried to order from summit and or jegs but
> no stock and don't know when they will see them, boy, you gotta luv it.
> Any ideas?? Thanks for your input, Mark Pendy #65 tr4 PS. could not send
> to your e-mail address. THANKS to all for the info. on my break-in oil
> question!!
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
More information about the Fot
mailing list