[Fot] ROCKER ARM ASSEMBLY REBUILDER

[MadMarx]

If I would follow your idea I would overbore the bushing bore and set a new
bushing which is offset honed.
I think you can get 1mm out of it.

Cheers
Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
Auftrag von Charly Mitchel
Gesendet: Dienstag, 20. Januar 2009 16:42
An: Mark J Bradakis; 'FOT'
Betreff: Re: [Fot] ROCKER ARM ASSEMBLY REBUILDER

Does anyone know of a non-roller rocker arm for a TR6 which is stock
appearing and will give a higher ratio than the stock rocker arm.  Seems to
me I heard of one somewhere once.
Charly Mitchel
TR6 #44
----- Original Message -----
From: "Mark J Bradakis" <mark at bradakis.com>
To: "'FOT'" <fot at autox.team.net>
Sent: Monday, January 19, 2009 7:30 PM
Subject: Re: [Fot] ROCKER ARM ASSEMBLY REBUILDER


> Rocker Arm Specialties, as mentioned in the Monster list:
>
> http://www.rockerarms.com/index.htm
>
> Oddly enough, this supplier was a recent topic in the MG-T list.
>
> mjb.
>
> http://www.dimebank.com/monster
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot