[Fot] Metal Question

[Barr, Scott]

<< I still largely have the original metal thingies though.>>

As do I.  I just try to bend mine in a different part of the
strap-thingie whenever I use them.

Scott


-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Tony Drews
Sent: Monday, January 05, 2009 9:38 AM
To: fot at autox.team.net
Subject: Re: [Fot] Metal Question

For areas where the wires / tubes / whatever go in and out frequently,
Velcro can be handy.  I still largely have the original metal thingies
though.

- Tony Drews

At 09:02 AM 1/5/2009, Robert Lang wrote:
>On Sun, 4 Jan 2009, Justin Wagner wrote:
>
>>Sacrilege!!!
>
>I'm not 100% sure, but I recall that TRF had new cable tie thingies
>made so you could weld in new...
>
>But if it's a race car, you want to make it serviceable above original.

>And if you can make it easier to work on, so much the better.
>
>rml
>
>p.s. I'm with Rocky on this one, although I do admit that I use some of

>the wire ties that Triumph provided in my race car.
>
>-----------------------------------------------------------------------
----
>Bob Lang              NER/SCCA                 |  This space for rent
>Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
>Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
>-----------------------------------------------------------------------
>---- _______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>http://www.fot-racing.com
>
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot