[Fot] 75 TR6 turn signals

[robert bownes]

Usually the result of not enough current going through the flasher. Would
check 2 things:

1) turn on the turn signal. Unplug the flasher. Does the signal go out
(making sure you are working with the correct flasher unit. The TR6 has at
least 2 in the circuit iirc)

2) check it with a light bulb at the 'output' of the flasher. If that blinks
and the turn signal does not, the signals are not drawing enough current.
Check for a bad/corroded ground. the bulb holders in the TR6 are
particularly bad about getting corroded.

Bob
76 TR6 CF57392

On Thu, Jan 1, 2009 at 1:29 PM, Robert Blake <rblake36 at yahoo.com> wrote:

> I have issues with my turn signal (Shocking)!   When indicating a turn in
> either direction with the turn signal, both front and rear lights turn on
> and
> stay on; they do not flash.  I have checked the flasher unit and it
> functions
> properly when tested with two bulbs in parallel across the battery.  Before
> I
> trouble shoot the turn signal in the column or start looking for issues in
> the
> wiring I thought there might be someone out there who has already invented
> the
> wheel.
>
> Thanks
>
> Bob Blake
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot