[Fot] Engine Plug Sizes, oil press pickup

Tony Drews tony at tonydrews.com
Tue Dec 22 22:13:26 MST 2009


In Jack's latest engine iteration he ran a pipe from the water pump 
to the hole at the rear of the head.

- Tony

At 09:38 PM 12/22/2009, n197tr4 at cs.com wrote:
>Interesting.  I have always blocked this off and dont ever remember seeing any
>nipples and hoses on any body else's car.
>
>Ed, did you call today?........
>
>Joe A
>
>
>
>-----Original Message-----
>From: EDWARD BARNARD <edwardbarnard at prodigy.net>
>To: steve <colordog.1 at earthlink.net>; FOT <fot at autox.team.net>
>Sent: Tue, Dec 22, 2009 9:16 pm
>Subject: Re: [Fot] Engine Plug Sizes, oil press pickup
>
>
>Steve:
>  do not block the heater valve port off. I have found that if you block that
>ort with a plug it restricts the flow of water through and around cylinders 3
>nd 4. I normally insert a fitting with a nipple, and attach a short piece of
>ose routed to the heater pipe on the left side of the engine which comes from
>he water pump housing. On street cars I tell my customers to leave the heater
>alve cracked to aid in the flow of H2O around 3 and 4.
>hat is the lists take on this?
>Ed-
>--- On Tue, 12/22/09, steve <colordog.1 at earthlink.net> wrote:
>
>rom: steve <colordog.1 at earthlink.net>
>ubject: Re: [Fot] Engine Plug Sizes, oil press pickup
>o: "steve" <colordog.1 at earthlink.net>, "FOT" <fot at autox.team.net>
>ate: Tuesday, December 22, 2009, 2:17 PM
>
>ops, sorry about the typos.  The heater pipe hasn't screwed anything as far
>s I know!!!
>I need a plug to block off the heater pipe hole atop the head. :)
>-----Original Message-----
>From: steve <colordog.1 at earthlink.net>
>Sent: Dec 22, 2009 11:40 AM
>To: FOT <fot at autox.team.net>
>Subject: [Fot] Engine Plug Sizes, oil press pickup
>
>FOT,
>
>What sizes are the following plugs for the TR3/4 engine:
>
>1, top of Cyl Head where heater pipe screwed it.
>
>2,  Manifold side of engine block to drain H2o.
>
>
>Also, on your cars, where do you pick up the oil pressure for the pressure
>auge?
>
>
>
>~Steve
>You are subscribed as colordog.1 at earthlink.net
>
>http://www.fot-racing.com
>
>
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>Brought to you by Team.Net consulting - Unix software specialist.
>ou are subscribed as edwardbarnard at prodigy.net
>http://www.fot-racing.com
>
>ot at autox.team.net
>ttp://autox.team.net/mailman/listinfo/fot
>Brought to you by Team.Net consulting - Unix software specialist.
>You are subscribed as n197tr4 at cs.com
>http://www.fot-racing.com
>
>ot at autox.team.net
>ttp://autox.team.net/mailman/listinfo/fot
>Brought to you by Team.Net consulting - Unix software specialist.
>_______________________________________________
>
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as tony at tonydrews.com
>
>http://www.fot-racing.com
>
>
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>Brought to you by Team.Net consulting - Unix software specialist.



More information about the Fot mailing list