[Fot] Rear wheel cylinder size

[Bill Babcock]

I think it depends on what you plan to do about bias bar or  
proportioning. You can get away with 3/4 fron and 3/4 rear with a bias  
bar and enjoy the simplicity of only needing one rebuild kit. I think  
most folks like a smaller rear though to allow lower pressure and a  
more mid-bar adjustment for bias.

On Aug 20, 2009, at 3:07 PM, Bob wrote:

> What size rear wheel cylinders do you TR guys prefer for vintage  
> racing......stock, 3/4 or 7/8?
>
> thxx
> Bob
> (TR3 under construction)
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> You are subscribed as billb at bnj.com
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot