[Fot] Rod ends source (Heim Joints)

[Chuck Arnold]

Aircraft Spruce sells Aurora bearings

2008/9/16 Bill Babcock <Billb at bnj.com>

> Aurora is one of the biggest rode end manufacturers in the US. Prices
> aren't any better than Summit, but the range of products is much wider.
> On Sep 16, 2008, at 9:55 AM, Russ Moore wrote:
>
> I am looking for some left and right hand threaded male type Heim joints.
> Any suggestions other than Pegasus or Summit?
>
> I am looking for male joints with a ½" UNF thread (L & R) and a 3/8" hole
> in the swivel portion. I also am going to need jamb nuts and high base nuts
> for welding on some tubes. (radius rods for a Spitfire)
>
> Thanks
> Russ Moore
> Spitfire #49
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
> Bill Babcock
> Babcock & Jenkins
> Billb at bnj.com
> 503.936.7660
> www.bnj.com
>
> Editor
> Ke Nalu e-Magazine
> *Paddlesurfing's Web Journal*
> *
> *
> Bill at kenalu.com
> www.kenalu.com
> blog: www.ponohouse.com/ponoblog
>
>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>
>


-- 
Chuck Arnold
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080916/da413ec5/attachment-0003.htm>