[Fot] Rod ends source (Heim Joints)

[Kramer, Robert]

Ask Kyle Busch what he thinks about the quality of rods ends Joe Gibbs Racing chose......

________________________________
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On Behalf Of REK46 at aol.com
Sent: Tuesday, September 16, 2008 1:15 PM
To: rem9 at frontiernet.net; fot at autox.team.net
Subject: Re: [Fot] Rod ends source (Heim Joints)

Buy good ones...your life may depend on it....there are many 'grades of these , in the steel used,the ball/socket, and the fact that you are trying to use two mixed sizes ,changes the ratings....best to use one size thread and ball....for a Spit, the 7/16" are fine.


**************
Psssst...Have you heard the news? There's a new fashion blog, plus the latest fall trends and hair styles at StyleList.com.
(http://www.stylelist.com/trends?ncid=aolsty00050000000014)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080916/252e641c/attachment-0003.htm>