[Fot] Good vibrations, bad vibrations

[Greg "Lunker" Hilyer]

Yes Bill, by the process of elimination I did get to the root of the  
problem. Funny thing to me is that although you are a fountain of  
information on the the list, you literally wouldn't give me the time  
of day when I introduced myself at The Glen.
Greg "Lunker" Hilyer
TR$ #314
Albuquerque NM
On Oct 25, 2008, at 8:49 PM, Bill Babcock wrote:

> Not that I'd stoop to telling you I told you so, but I think I told  
> you so. I had the exact same problem, went through the exact same  
> "low-rent shop near VIR says it's okay" problem, then took the  
> shaft back to Portland with me and took it to a good driveshaft  
> outfit. In my case it was just the bearings starting to brinnel and  
> turn in the cups even though they felt fine.