[Fot] Bearings for Southwick front hubs and Uncle Jack axels

[tr3a58 at verizon.net]

   Chuck;

               I  have  the Southwick hubs and didn't change the bearings
   when  installing  the Stub axles. The listing I have from Southwick is
   as follows:

    Timken numbers are

   Inner cup - 1920         Inner cone - 1986

   Outer cup - 5185        Outer cone - 5062

   Inner seal collar - contact Southwick

   Inner seal - 13509 CR

   I also have the origional instruction sheet if you need it. I can scan
   it and send as a Jpeg.

   Dean T.

   Oct 13, 2008 02:57:30 PM, triosan at gmail.com wrote:

     Can  someone  please  tell  me the timken[or other] inner and outer
     bearing
     numbers  required  when using the Uncle Jack axles in the Southwick
     front
     aluminum hobs?
     Thanks
     --
     Chuck Arnold
     _______________________________________________
     Support Team.Net http://www.team.net/donate.html
     http://www.fot-racing.com
     Fot mailing list
     Fot at autox.team.net
     http://autox.team.net/mailman/listinfo/fot