[Fot] Clutch Question for the Group

[Chuck Arnold]

I just bought a quartermaster 7.5" dual disk will use with Fidanza aluminum
flywheel.  Bill Babcock recommended quartermaster over Tilton.  Cost was
$480 or so from Hoerr racing products [hrpworld.com].  Part number for the
one with  1/18 by 10 disks is QM298000.  Figures, I am going to put in close
ratio gears.  They have a 1x23 spline drive so will have to get new disks.

On Sat, Oct 11, 2008 at 4:50 PM, <GSFuqua1 at aol.com> wrote:

> This winter I will need to renew the clutch.  Go figure, someone mentioned
> something about having a heavy foot or something.  Ha ha  Anyway, I was
> wondering if there is any advantage to running a Tilton set up versus the
> usual
> selections.  So I am posing the question to vast intelligence in the FoT
> community.
> What say you and what models are preferred?  I am running a 63 TR 4 with
> O/D.
>  Thanks & Cheers,
>
> Gary Fuqua
> Classic Sports Cars
> Branson, MO
> **************New MapQuest Local shows what's happening at your
> destination.
> Dining, Movies, Events, News & more. Try it out
> (http://local.mapquest.com/?ncid=emlcntnew00000002)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
>


-- 
Chuck Arnold