[Fot] TR4 rear main seal

[Bill Babcock]

I don't think so. you can pull the center main with the engine in  
place, but I've never figured out a way to pull the seal or the rear  
main without pulling the engine.
On Nov 10, 2008, at 5:10 PM, J.C. Hassall wrote:

> I need to change the main bearings in my TR4.  The engine is in the  
> car with the gearbox attached.  Is it possible to pull the rear main  
> cap?  I'm specifically concerned about the seal - I have the new  
> split-type seal.  I took lots of pix of the engine as I assembled it  
> *except* the split seal and associated bits.
>
> TIA
>
> jim
>
> --
> J.C. Hassall
> Blacksburg VA
> '63 TR4 in autox preparation
> 96% finished, 90% to go  
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill at kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog