[Fot] sway bars

[MadMarx]

Hi,

I run 22mm at front and 17mm at rear. My springs are stock items. I lowered
the front as you did and the rear with fitting shims between spring and
axle. I don't set the car too flat cornering, I like it waving around and
the lean over. Good at wet races too.

Chris

-----Urspr|ngliche Nachricht-----
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
Auftrag von Gary Horstkorta
Gesendet: Dienstag, 4. November 2008 02:50
An: fot at autox.team.net
Betreff: [Fot] sway bars

I am currently racing my 1962 TR4 with a > ADDCO front sway bar, the car
has been lowered approx. 2 (removed front spring spacer, de-arched rear
leaf springs), runs on Hoosier Speedster tires (185/65R15) with zero
negative camber and find the car leans over at a pretty good angle while
cornering.  I am considering trying a larger diameter front sway bar to help
minimize the lean.  Any thoughts as to a suitable diameter?  Thanks.



Gary
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

[demime 1.01d removed an attachment of type image/jpeg which had a name of FPS_15729 Kopie.jpg]