[Fot] GT6 japanese starter

[N197TR4 at cs.com]

there are reports that an ISUZU starter of certain years can be a direct replacement, but i have never confirmed that.

joe a

>If memory serves me right, there is a short and long Lucas starter. I 
>had the short version on my GT6 and it clears the Mueller headers that 
>are on the car. Of course if you are running big time compression ratios 
>then the Lucas probably won't have enough umph! to turn the engine over.
>
>Terry and Cindy wrote:
>> I'm chasing a replacment starter for a GT6 that is shorter to give me more
>> clearance around the extractors. The Japanese Nippondenso ones I've measured
>> (off Toyotas etc) require a thick adaptor plate to sort out gear meshing,
>> which results in them being about the same length as the Lucas one. I'm
>> prepared to remake the backing plate to suit a different bolt pattern. Has
>> anyone found something suitable???
>> Thanks, Terry O'Beirne, Australia
>> _______________________________________________
>> http://www.team.net/donate.html
>>
>> Fot mailing list
>> Fot at autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> You are subscribed as rdavis4 at cfl.rr.com
>_______________________________________________
>http://www.team.net/donate.html
>
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>You are subscribed as n197tr4 at cs.com