[Fot] aluminum radiators again

[REK46 at aol.com]

Except for a few low volume,old fashioned mfgrs in europe, all OEMS use flat 
rad tubes that they make themselves from brazing sheet alum and 
roll-form/welded tubes....This has been since the 80s when they all converted from copper to 
alum..These rads are Nokolok brazed with the fin ,tube and headers and have 
far superior heat transfer by design and matls than copper, and no lead or 
hazards...They can be stacked and lengthend to any size and fin count....Try 
Griffin Rad, they bought the Ford process and equip and make an excellent and cold 
rad to any dimension or fittings....except they use alum tanks and welds 
instead of the OEM plastic and Orings on the headers. I know..I sold 80% of the 
alum to all the OEMs for 20 yrs


**************
Vote for your city's best dining and 
nightlife. City's Best 2008.
      
(http://citysbest.aol.com?ncid=aolacg00050000000102)