[Fot] TR6 diff mounts

[N197TR4 at cs.com]

Mark J Bradakis <mark at bradakis.com> wrote:

>I would strongly suggest that even if the frame mounts show no signs
>of distress, you take this opportunity to weld in some reinforcing plates
>for both the front and rear mounts.  That will go a LONG way towards
>increasing the life of either the stock rubber or the harder poly mounts.
>
>On a completely unrelated note, Ellas Bates McDaniels passed away
>Sunday at age 79.  No doubt that name means absolutely nothing to
>any of you.  But I'm guessing a few of you might recognize him from
>his stage name, Bo Diddley.
>
>Sigh.
>
>mjb.,
>_______________________________________________
>http://www.team.net/donate.html
>
>Fot mailing list
>Fot at autox.team.net
>http://autox.team.net/mailman/listinfo/fot
>
>You are subscribed as n197tr4 at cs.com