[Fot] diff seal for TR6

[Bill Babcock]

I always put in two seals. Not rawhide, just whatever narrow seal I  
can find.

On Jun 2, 2008, at 9:58 AM, N197TR4 at cs.com wrote:

> Jack,
>
> One time I could only find a single lip seal.  The seal housing was  
> sized so
> I could put two single lip seals in tandem.....Two Chicago Rawhides  
> in tandem
> might do it.
>
> JoeAlexander
>
>
>> I just returned from a visit to the local bearing and seal company,
>> Motion Industries, who said they could find only one seal with a
>> 2.686 OD and 1.500 ID. It is a single lip Buna seal made by Chicago
>> Rawhide. I think it will be better than the last replacement seal I
>> installed several years ago, which I find was an original equipment
>> type made from so,e sort of felt.
>>
>
>   </HTML>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as billb at bnj.com

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com