[Fot] Thanks Chuck...Scraper & Windage Tray Project-Status

[N197TR4 at cs.com]

Chuck....Since I have no experience yet, this is encouraging and useful 
information....and thanks for breaking the ground on this feature.

Joe Alexander


> Just an update.  A couple of years ago I got the first one from 
> crank-scrapers [they used my oil pan, oil pump and rod and their block/crank].  Went in 
> when the engine was out.  There was a little interference on the tray, but 
> the grinder fixed that straight away.  I was concerned when I assembled it that 
> the interference with the oil pump on install would not allow me to remove 
> the oil pan with the engine in the car.
> 
> I just recently got the new unit.  Installed it with the engine in the car.  
> Included the teflon scrapers.  Went in very easy.  Just had to relieve two 
> small places where the scraper hit some part of the crank.  Very pleased.  No 
> interference on the tray.
> 
> Chuck
> 

   </HTML>