[Fot] spitfire woes
fpspitfire at comcast.net
fpspitfire at comcast.net
Thu Jul 10 20:45:57 MDT 2008
I've seen valve float on the dyno. Looks pretty much like what you descibe Dayle.
Pulls well until it hits a magic number, then all hell breaks loose.
Easy to check. Pull a couple valve springs and check them...if you are a place with a chassis dyno, there should be a valve spring checker near by.
Back to back with a new set found about 40 lb difference.
Also, beware that I've found Isky has quit selling the good spring sets for the Spits. We are trying to find a suitable alternative, but haven't come up with anything yet.
aaron
-------------- Original message --------------
From: "Scott Cypher (SpitfireRacer)" <srcypher at mac.com>
> Is valve float likely? I've not personally seen how that show on a
> dyno...
>
> Thanks
> -S
>
> Scott Cypher
> SCCA #562573
> HP Spitfire 1500 #57
> _______________________________________________
More information about the Fot
mailing list