[Fot] MSD units

[Joe Curry]

I tried to find the installation instructions that came with the MSD6! I
currently use but could not locate it.  I will keep looking.

However, I did run across a coil compatibility list which may explain some
failures.

But I remember quite clearly the Plug Wire issue because I called The MSD
tech support to ensure that the ones I decided on would not damage the unit.



-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Randall
Sent: Wednesday, July 02, 2008 2:42 PM
To: 'Amici Triumphi'
Subject: Re: [Fot] MSD units

> The old carbon core wires are not sufficient.  MSG explicitly stipulates
> that you should only use Helically wound suppression wires with their
> units.

Even the instructions posted today on their web site do not say that for
MSD5 units (the one that went thermally intermittent on my motorhome).

And I'm fairly certain (though I don't have them handy to check) that the
instructions I originally received with the 6A did not say that either.

But thanks for the tip.

Randall
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot