[Fot] Part needed - others available.

[Greg "Lunker" Hilyer]

Hi Gary,
I just went and looked at the plinth you need on a '65 I have. It's a  
bit unusual to me in that it is covered in leather [could be vinyl  
but doesn't look like it]. The covering is shrunk enough to look like  
it was factory done. I've never noticed one covered like this before.  
The underlying plastic looks to be good but one won't know until the  
covering comes off, not to mention the glue attaching it. Let me know  
if this might work for you.
The car it is attached to is destined to be a parts car unless some  
FoT needs a rusty/crusty [by New Mexico standards - needs rockers and  
some floor repair] racer candidate.
Greg "Lunker" Hilyer
TR4 #314
Albuquerque NM
On Jan 11, 2008, at 3:01 PM, GSFuqua1 at aol.com wrote:

> I am nearing completion of a 64 Concours TR 4.  The one piece of   
> the dash I
> am in desperate need of is the Plinth that houses the various   
> switches,
> cables, etc.  The plastic part.  Moss # 633-400  I have  the old  
> one but it is in
> very bad shape.  Anyone have something that could  help me out?
>
> Thanks,
>
> Gary Fuqua
> Classic Sports Cars
> Branson, MO
> _gsfuqua1 at aol.com_ (mailto:gsfuqua1 at aol.com)
>
>
>
> **************Start the year off right.  Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot