[Fot] Tr-6 crank scrapper

[Chuck Arnold]

I have used the crank scraper and windage tray made by Crank-scrapers.com in
my TR6 [actually, they used my oil pump, sump pan and a rod in their initial
design/creation process].  Unfortunately, the car and engine were stolen.
So I now have another one on order [this one is modified in that it has
Teflon edging.].  It is supposed to add hp, but going from say 185 to 190 at
the wheels is really not too discernible.

The scraper requires a metal piece that goes between the pan and the lock to
provide enough clearance.  You can see pictures of my old setup at:

http://picasaweb.google.com/Triosan/WindageTrayScraprerAndStuds

On Mon, Feb 25, 2008 at 10:46 AM, Rob <19to1tr6 at comcast.net> wrote:

> Hello, I am wondering if anyone is using a crank scrapper and if there
> were
> discernable performance improvements Also with a stock crank and rods was
> it a
> simple bolt on with out any clearance issues.               thanks    rob
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as triosan at gmail.com
>



-- 
Chuck Arnold