[Fot] Weber DCOE fuel inlet parts

[TeriAnn Wakeman]

Have you tried Pierce Manifolds?

www.piercemanifolds.com/products.htm

Teriann

Chuck Arnold wrote:
> I have a set of triple Weber DCOEs.  The fiber/cotton?? washers surrounding
> the banjo bolts on the fuel inlets have deteriorated to the point they
> leak.  I cannot find replacement parts.  The outer one is 15mm, but crush
> washers come only in14 [too small] and 16 [too big].  The Carb supplier I
> usually use says they are not available.  Does any one have a source?