[Fot] [6pack] Aftermarket damper for TR6

[Charly Mitchel]

Richard, could you send me the attached photos of the ATI damper.  I very
interested in one.
Thanks,
Charly Mitchel
TR6 #44
----- Original Message ----- 
From: "Richard Good" <goodparts at verizon.net>
To: "Chuck Arnold" <triosan at gmail.com>
Cc: "Friends" <fot at autox.team.net>; "Triumph" <6pack at autox.team.net>
Sent: Monday, February 04, 2008 12:50 PM
Subject: Re: [Fot] [6pack] Aftermarket damper for TR6


> I have ATI Super Damper's in stock that I have made to fit the TR6.  I
> will soon have the batch of aluminum pulleys done to complete the kits.
> The kit will include the damper, choice of fan extension or replacer
> washer & bolt, crank pulley, new water pump with aluminum pulley,
> alternator pulley and belt.  Complete kit will sell for around $900.
> Damper only is $600.
>
> The ATI damper is a rubber isolated damper in a steel shell.  The timing
> marks are on the shell which is solid to the crank and cannot slip.
> Worked wonders for my TR6.
>
> Photo of installed damper attached.  Two piece timing cover not included
> but available.
>
> Regards,
> Richard Good
> Good parts
>
> Chuck Arnold wrote:
>
> >Found a couple of websites that might help.
> >One has several dampers for the for 4-6 cyl engines:
> >http://www.bhjdynamics.com/index.php?main_page=index&cPath=6_39
> >
> >the other has mandrals that bolt to the damner and v-bely pullies that go
on
> >the mandrel
> >http://www.jonesracingproducts.com/csDh.html#frd
> >The secret is to find the correct sizes.  Still probably a $700
proposition.
> >
> >Chuck
> >
> >On Feb 4, 2008 10:24 AM, Robert Lang <lang at isis.mit.edu> wrote:
> >
> >
> >
> >>On Mon, 4 Feb 2008, Chuck Arnold wrote:
> >>
> >>
> >>
> >>>bob,
> >>>did the ford part have a v-belt pulley, or is it just a damper with no
> >>>pulley?
> >>>
> >>>
> >>I never did see a part. But I suspect that is was just the dampener.
> >>
> >>All I can recall for detail was that it is some motor that is used in
> >>racing and the machinist implied that it was off the shelf. That's the
key
> >>to making the part a lot less $$$$.
> >>
> >>I'll dig around and see what I can figure out. The machinist retired not
> >>long after we figured all this out.
> >>
> >>:-(
> >>
> >>I really liked working with that guy.
> >>
> >>rml
> >>
>
>>--------------------------------------------------------------------------
-
> >>Bob Lang              NER/SCCA                 |  This space for rent
> >>Solo Chair 2008       TR6 40 F Prepared        |  Triumph!
> >>Voice:781-438-2568    FAX: 617-258-9535        |  Cell: 339-927-4489
> >>
>
>>--------------------------------------------------------------------------
-
>
> [demime 1.01d removed an attachment of type image/jpeg which had a name of
ATI Damper installed .JPG]
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot