[Fot] Tr3 steering shaft

[steve belfer]

I have the one piece shaft in the car and an extra unit in storage (lower half only).  I don't plan on swapping this out now since everything is working great.  I'll look for a smaller dia. Quick release unit.  Btw, I just had some nice roll bar work done, if anyone wants to see, email me for pictures.

Steve
Sent via BlackBerry from T-Mobile

-----Original Message-----
From: "Brad Kahler" <brad.kahler at 141.com>

Date: Tue, 09 Dec 2008 00:52:13 
To: <colordog.1 at earthlink.net>; fot<fot at autox.team.net>
Subject: Re:  [Fot] Tr3 steering shaft


Steve, 
The later TR3s had split steering shafts.B  If yours is a solid one piece I would look for a later gearbox with the slit column.B  Much eaiser to work on as well..B  
Brad
-----Original Message-----
From: "steve belfer" <colordog.1 at earthlink.net>
Sent 12/8/2008 4:57:57 PM
To: fot at autox.team.net
Subject: [Fot] Tr3 steering shaftI'm about to get a quick release steering wheel shaft welded to my existing steering shaft.  The part that was ordered is bigger in diameter than the shaft itself. Does this mean I could not ever fix the steering box, should the need arise because the shaft pulls out from the front?  Do I need to get a quick release unit with an end that's the same dia. As the shaft and not bigger?
Steve
Sent via BlackBerry from T-Mobile
_______________________________________________
Support Team.Net http://www.team.net/donate.htmlhttp://www.fot-racing.com
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot