[Fot] TR4 Rocker Shaft
malaboge at aol.com
malaboge at aol.com
Thu Dec 4 10:19:40 MST 2008
Peter-
OK, it's personal opinion time here ...
The TR4's don't usually have the same wear issue that our "longer" brothers do (6 cylinder cars), not to say that they do not wear out as the most certainly do, just not as quickly.? The little bronze (?) bushes in the rockers are much more labor intensive to replace than the shaft.? Especially in a race car, I would rather "get the shaft" than replace bushes, so I only use the softer shaft.
Down off the soapbox now.
Been gettin the shaft for years...
?????????????????????? Nick in Nor Cal
-----Original Message-----
From: Peter Vucinic <pvucinic at netspace.net.au>
To: FOT <fot at autox.team.net>
Sent: Thu, 4 Dec 2008 12:45 am
Subject: [Fot] TR4 Rocker Shaft
Anyone on the list have a contact for good quality hardened rocker shafts
for TR4 engine?
Thanks.
Kind Regards
Peter Vucinic
TR-4
Fot mailing list
<mailto:Fot at autox.team.net> Fot at autox.team.net
<http://autox.team.net/mailman/listinfo/fot>
http://autox.team.net/mailman/listinfo/fot
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot
More information about the Fot
mailing list