[Fot] TR6 piece between radiator and motor
Bill Babcock
Billb at bnj.com
Sat Aug 16 12:29:08 MDT 2008
I'll tell you, there's no rigidity of any type anywhere. The Ambro #1
lacks the "roll cage" bars from the hoop to the rear spring mount that
Peyote has. The front bracing is similar to Peyote. When I jack a
front wheel the other front wheel comes off the ground immediately.
When I jack a back corner, only that corner rises. The rest hardly
lift on the springs. If I jack a rear corner on Peyote the unjacked
rear wheel comes off the ground about one jack stroke after the jacked
side, and the front wheel on the jacked side comes off the ground a
couple of pumps later.
On Aug 15, 2008, at 11:18 AM, Kas Kastner wrote:
> In the days of no allowances for "A" arm mods and ball joint changes
> it
> worked just SWELL. You don't really think there is any tensional
> rigidity in
> a TR 3-4 frame do you?
> ----- Original Message -----
> From: <fubog1 at aol.com>
> To: <N197TR4 at cs.com>; <RKramer at rdoequipment.com>; <jimhearn1 at comcast.net
> >
> Cc: <fot at autox.team.net>
> Sent: Friday, August 15, 2008 11:03 AM
> Subject: Re: [Fot] TR6 piece between radiator and motor
More information about the Fot
mailing list