[Fot] TRIUMPH Crank Scrapers And Windage Trays - Ishihara-Johnson

[Scott Cypher (SpitfireRacer)]

I already have 2, both Teflon, one installed and in use; you could  
always get an additional Teflon strip if you change the rods or crank,  
and can re-profile....

I was the one who pushed him to get the spitfire scraper developed and  
also worked with him on a girdle for my spit....I even had ARP make  
special main studs so I clamp it all together...

Pics of the setup are within my gallery link in my sig; same place as  
Aaron's lump; I'm hosting his pictures...

Off to MARRS I regional race tomorrow at summit point; should be a  
good day; 6 other HP racers to play with...

Thanks
-S

Scott Cypher
SCCA #562573
HP Spitfire 1500 #57
Http://gallery.mac.com/srcypher