[Fot] Steel Flywheels on eBay...if you are in the market for a steel flywheel.

[MadMarx]

I use one of those design and can recommend them very much. They are very 
easy to the crank stress and protect the rear main journal from wear because 
of the small weight.

Very good stuff!

Cheers
Chris

----- Original Message ----- 
From: <N197TR4 at cs.com>
To: <fot at autox.team.net>
Sent: Friday, April 18, 2008 3:59 AM
Subject: [Fot] Steel Flywheels on eBay...if you are in the market for a 
steel flywheel.


> FoT List
>
> This is about FLYWHEELS.......interested?  otherwise delete.
>
> TR3 TR4 Steel Flywheel - Best Design, I think.
> eBay Item number: 170211511476
> Pictures of finished and work in process flywheels
>
> I pulled the first steel flywheel off of the production pallet today.
> I located a ring gear on it and fastened it.
> I located steel flywheel onto a crankshaft and fastened it.
> I located a diaphragm type pressure plate on it and fastened it.
>
> It all fits and this one goes on my Ambro.
>
> That leaves a few left out of a run of 25 Flywheels.
>
> This design has a large chamfer in small ID for ease of assembly of the
> transmission that other steel flywheels may not have.  (Thanks, Dean 
> Tetterton)
>
> Material is milled at the periphery, where it counts most.
>
> 4130 Steel....chromium, nickel, & molybdenum content...used in connecting
> rods and other critical components (Thanks, Chuck Gee).
>
> Tomorrow, I start packaging and shipping.
>
> Joe A
>
>
>
>
>
>
>
>
>   </HTML>
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as tr4racing at googlemail.com