[Fot] crank dampers 6 cyl

[Lamp, Randy H]

I used a Fluid Damper for a small block Ford, with very little
modification.
I think FOT member Scott Janzen still has it on his car.

R. Lamp
-----Original Message-----
From:
fot-bounces+rhlamp=babcock.com at autox.team.net
[mailto:fot-bounces+rhlamp=babcock.com at autox.team.net] On Behalf Of
Terry and
Cindy
Sent: Tuesday, April 01, 2008 5:10 AM
To: fot at autox.team.net
Subject:
Re: [Fot] crank dampers 6 cyl

I'm on the hunt for s silicone/viscous/fluid
filled damper for the front
of
a TR6 crank. Does anyone have any experiences
with what can be made to
fit??. I have a full machine shop, so mods aren't a
problem. I've tried
a
web search and drawn a blank, but I've heard of them
being used. 

Thanks a lot, Terry O'Beirne
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

You are subscribed as
rhlamp at babcock.com

-----------------------------------------
This message
is intended only for the individual or entity to which
it is addressed and
contains information that is proprietary to The
Babcock & Wilcox Company
and/or its affiliates, or may be otherwise
confidential.  If the reader of
this message is not the intended
recipient, or the employee agent responsible
for delivering the
message to the intended recipient, you are hereby notified
that any
dissemination, distribution or copying of this communication is
strictly prohibited.  If you have received this communication in
error, please
notify the sender immediately by return e-mail and
delete this message from
your computer.  Thank you.