[Fot] Multi function brake switch

[Larry Young]

I believe this is the one I'm using 
http://www.partsexpress.com/pe/pshowdetl.cfm?Partnumber=330-070.  Some 
of the stuff sold at Napa, etc. don't have both circuits (SPST not SPDT).

Gt6steve at aol.com wrote:
> Almost exactly the same need.  I want to drop out the OD circuit on a 
> 700R4 trans when the brakes are applied.  Do you have any numbers for 
> those Bosch switches?
>  
> Thanx, Steve
>
>     Steve,
>     You can use a commodity Bosch relay.  These have normally open and
>     normally closed contacts.  They are apparently used all over
>     modern cars, so can be had very cheaply.  I use one for my
>     overdrive wiring, so that I can use the a switch on the reverse
>     gear to lock out the overdrive, which is opposite from the normal
>     switch arrangement.
>     Larry
>
>     Gt6steve at aol.com wrote
>
> Almost exactly my
>
>
>
> ------------------------------------------------------------------------
> Get a sneak peek of the all-new AOL.com 
> <http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982>.