[Fot] Triumph roll bar / cage concepts

[Bill Babcock]

For what it's worth, here's a photo of Peyote's cage. Somewhere I  
have photos with the body off. It's actually a very good design and  
if you can get away with it would give you an incredibly stiff car.  
All the tubing is .060, which is not a good thing. It's fortunate  
that I never put it on it's lid, because I'm not sure the bar would  
have held. The new version will be .095 on the main hoop and hoop  
supports as well as the driver intrusion bar, and the rest will be . 
060. It will weigh about the same because I'm using slightly smaller  
diameter tubing.

On Oct 23, 2007, at 6:54 PM, marty sukey wrote:

> Hi folks. I am contemplating the addition of real rollover  
> protection in the

[demime 1.01d removed an attachment of type multipart/appledouble]
> TR6 over the upcoming winter. As I have looked at you folk's cars  
> over the
> years I have seen some different approaches to bar/cage  
> fabrication. I should
> have been taking pictures but I didn't. Any chance you have some  
> digital
> pictures of your bars/cages you could email me to get the thought  
> process
> rolling?
>
> Thanks,
> Marty Sukey
>
> _________________________________________________________________
> Boo! Scare away worms, viruses and so much more! Try Windows Live  
> OneCare!
> http://onecare.live.com/standard/en-us/purchase/trial.aspx? 
> s_cid=wl_hotmailne
> ws
> _______________________________________________
> http://www.team.net/donate.html
>
> billb at bnj.com
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot