[Fot] Tilton brake piston size

[Bill Babcock]

There's a lot to be said for using all the same size cylinders if you  
are going to have a bias bar. For one thing, you only need one spare  
rebuild kit for all three MC.

On Oct 23, 2007, at 1:25 AM, Joe Boruch wrote:

> Dave, I am on the road for the week, so can't look to see what I  
> have where,
> but I have two 0.70 masters and one 0.75 master.  I think the 0.75  
> is front
> and a 0.7 for clutch and the other for rear.   I, however have  
> Jaguar 3 piston
> front calipers and Wilwood rear calipers, so my car may not be a good
> comparison.  I went with the Wilwood pedal assembly with Tilton master
> cylinders.  Initially this was because the Tilton pedals were on  
> back order,
> but after looking at them closer I liked the Wilwood ones better  
> for how I was
> going to mount them.  They also have non-slip pedals.  Download the  
> drawings
> and compare them.   Joe(B)
>
> -- SpiwakD at aol.com wrote:
> Am considering a Tilton pedal setup with master and slave cylinders  
> for  TR3.
> Who knows what size piston to order?
>
> Dave