[Fot] plug wires

[Guyots3 at wmconnect.com]

In a message dated 7/10/2007 11:00:10 AM Pacific Daylight Time, 
fot-request at autox.team.net writes:

> Magnecor, either direct from Magnecor or Moss Motors.  Note that the coil 
> lead hat on the TR6 kits do not seal to the Mallory dizzy tower, so some 
> additional work is required to proof it against water leaks.
> 
> Shane Ingate, sweltering in 98 degrees in swampy DC
> 
> >I'm looking to install the optimum performance plug wires for my GT6, 
> >running
> >a Mallory dual point distributor and a Bosch coil.  the car is prepped for
> >vintage racing. Any recommendations and sources?

Whilst it is true that there are many good quality plug wires out there, I 
too am using Magnceor, # M-65221 for several years now to good effect.

On my Vitesse, (1998cc) Mk.2 engine, (same as GT6+), I am also using NGK 
stock # 6637:BPR6EIX Iridium Plugs - from Rockauto.com
(now gapped to 40 thou')

With Mallory Dual Point distribitor :YL type, model 23, part # MAA-2367801, 
(vented, non-flame arrested).         

fitted with Pertronix ML-161, and a MSD # 8202 Coil, (mounted on the front 
bulkhead).

and a MSD Digital 6 Ignition pack - with rev limiter.

Regards

Leon

  


 




<A HREF="http://community.webshots.com/user/vitesse1963">http://community.webshots.com/user/vitesse1963</A>  
    
    
   </HTML>